http://www.weidrin.com
  • HOME
  • ABOUT US
  • PRODUCTS
  • NEWS
  • JOBS
  • CONTACT US
  • 请稍候...
  • CR
  • HOMOPOLYMER
  • COPOLYMER
  • CSM
  • GOODFLON PTFE
  • RUBBER CHEMICALS
  • PREMIX
  • Fluorosilicone rubber Weidrin®-R-1000MC LOW COMPRESSION

    Description:40-60 durometer, off-white, uncatalyzed fluorosilicone rubber base.

    Item Testing method 1040-MC 1050-MC 1060-MC
    Hardness shore A
    ASTM D2240
    40 ± 3
    50 ± 3
    60 ± 3
    Tensile strength MPa
    ASTM D412
    9.5 ± 1
    9.5 ± 1
    9.5 ± 1
    Elongation at break %
    ASTM D412
    350±75
    350±75
    300±75
    Tensile set %
    GB/T528-1998
    3~8
    3~8
    3~8
    Tear strength KN/m
    ASTM D624-B
    25±5
    25±5
    25±5
    Compression set 177℃ 22hr(30%)
    ASTM D395
    ≤12
    ≤12
    ≤12
    Volume change (reference fuel B)%(23℃×24hr)
    ASTM D471
    ≤20
    ≤20
    ≤20

    Properties obtained using 2.0phr Heat-resistant additive and 0.6phr DHBP. Molded 15min at 165℃, post-cured 4hr at 200℃.

    Application:

    1. Aerospace industry: used in aircraft as seals to resist fuels and/or lubricants, such as O-rings, spacers, integral tank sealing, seal rings, sensor materials, diaphragms and clips for fluorosilicone spacers.
    2. Automobile industry: used as sealing rings, grease seal, diaphragms, pipes and valve-linings for various types of vehicles.
    3. Petrochemical industry: sealing elements used in pump, valve and oil tank, which are used in high/low temperature and chemical circumstance.
    4. Medical and health care: used in manufacturing medical apparatus or instruments, and artificial visceral organs, such as medical pipes, medical hoses for fluids and artificial valves.
    5. Martial industry: used in poor environment, which requires materials to resist low temperature, oil and acid, for instance, corrugated pipes used in hydraulic system of martial aircraft, sealing rods for doors, windows and covers on special vehicles, sensor materials and etc.

    Package: Complex bags made with aluminum and plastic. Each sack is 12.5 kg. 2 sacks are put in 1 box

    Storage: Validity is 1year. Shall be put in dry and ventilate places

    Attention:

  • The product shall be kept neutral, avoid being touched with acid or alkali products.
  • The product can flow under its own weight. Shall keep it in good condition of packing during transportation and application, in order it not to flow out.